Go Green

Intellidyne

Intellidyne LLC is the leading manufacturer of energy economizers for commercial and residential applications. Our exclusive line of heating, central air conditioning and commercial-refrigeration economizers is proven to reduce energy consumption between 10 percent – we guarantee that, every time – and 30 percent.

Intellidyne offers complete economizer solutions for hydronic, steam and forced-air heating systems; a wide range of refrigeration units; and leading central package/rooftop air conditioners.

Over the past 15 years, thousands of Intellidyne Energy Economizers were installed in government, commercial and residential buildings. Reducing energy consumption, lowering energy costs and even helping to reduce pollution - these are the pillars beneath Intellidyne's strength.

Intellidyne’s non-invasive energy economizers are easily installed by Certified Intellidyne Contractors and immediately reduce energy consumption by as much as 30 percent in any furnace, boiler, air conditioner or refrigeration unit. By better managing energy use, Intellidyne’s patented economizers also extend the lives of heating, cooling and refrigeration systems and reduce regular maintenance – all while providing optimal environmental comfort.

Commercial Cooling / Refrigeration:

Intellidyne Energy Economizers can be installed on commercial AC systems with reciprocating or scroll type compressors larger than four tons. We also offer a compressor control for commercial refrigeration systems with compressors rated at 1.5 horsepower or larger. Both compressor controls will reduce compressor cycling and compressor run time resulting in substantial reductions in KWH consumption.

Residential Cooling:

The Intellidyne residential air conditioning control is the perfect addition for most residential central AC systems. Economical to buy and easy to install, the Intellidyne AC control is a smart way to reduce the electricity used by your air conditioning systems compressor.

		The RU will reduce electric consumption, typically 10% to 20%, when installed on commercial refrigeration/ freezer (refrigeration) systems. The RU represents a major advancement in refrigeration system energy-saving technology, unsurpassed in today’s commercial refrigeration marketplace.
		The CAC typically reduces Commercial Air Conditioning electric consumption by 10% to 20% or more. The CAC is a microprocessor-based, UL listed, electronic control that uses intelligent Dynamic Cycle Management (DCM) technology to automatically adjust the compressor cycles to achieve the greatest efficiency and reduced electrical usage, while assuring consistent temperature levels.
		The AC typically reduces home Central Air Conditioning and Heat Pump electric consumption by 10% to 20% or more. The AC is a microcomputer-based UL listed electronic control that automatically adjusts the compressor cycles to achieve the greatest efficiency and reduced electrical usage, while assuring consistent temperature levels for even the most temperature sensitive homes.

Call us at 786-346-7590 or email us at sales@southerncomfortac.com for more pricing or ordering information.

^ Back To Top

---

Solar Assisted Air Conditioning

SAA's Technology is based on 4 years of research and development, studying the thermodynamic behavior of the refrigerants. Along with this development, SAA was able to produce the ultimate Solar Assisted Air Conditioning System in the world.

By "Super Heating" the refrigerant with the aid of the Solar Collector, we are able to increase the temperature difference between the condenser coil and the ambient temperature. By creating this difference, SAA is able to utilize the entire coil face at the condenser which allows a better heat exchange throughout the entire system.

With a greater heat exchange, SAA is able to not only reduce the temperature in the conditioned space but also maintain a better humidity control which makes the space more comfortable at a higher temperature.

With the combination of the solar heat and changing the thermodynamic process of the refrigerant, SAA is able to reduce the required work of the heat of compression operation of the compressor. This then lowers the required electrical consumption, reduces the running time of the entire system and maintains a comfortable conditioned space.

		SAA Ductless Mini Split Wall Mount System 9,000 - 30,000 BTU Stylish, slim and elegant, the SAA Mini Split Wall Mounted System is designed for single room application. The SAA Mini Split Wall Mounted System is great to cool your home or business without air ducts. Air ducts can allow allergens to build up over time. The SAA Mini Split Wall Mounted System features washable micro-filters. Our filters absorb dust, mold spores and microorganisms by static electricity. Growth is inhibited and deactivated. With the SAA Mini Split Wall Mounted System, such allergen issues can be a thing of the past. The SAA Mini Split Wall Mounted System is the perfect solution for sunrooms, room additions, garage conversions and more. The SAA Mini Split Wall Mounted System is an excellent alternative for heating and cooling older homes with radiators, baseboard heaters or limited attic space.
		SAA Ductless Universal Floor/Ceiling System 18,000 - 60,000 BTU The SAA Floor/Ceiling Mount Air Conditioner has multiple applications for mounting. These units can be mounted low on the wall close to the ceiling or low on the floor, yet high enough for a vacuum to get under them. Slim and lightweight in design, these systems are ideal for limited space applications.
		SAA Ceiling Cassette System 18,000 - 48,000 BTU Extremely discreet, with only the grill showing in the ceiling, these units fit neatly into the ceiling and distribute conditioned air through 2, 3 or 4 sides of the unit. Incorporating the latest fan technology, SAA Ceiling Cassettes distribute the conditioned air evenly throughout the room. The airflow direction, up or down is set automatically to match the operating mode, down for heating, up for cooling. SAA Ceiling Cassette models are ideal for light commercial applications and work well in large, open spaces.
		SAA Concealed Duct System 9,000 - 60,000 BTU The SAA Concealed Duct System offers the utmost in versatility in solving your cooling and heating needs. The SAA Concealed Duct System, automatically adjusts its performance to meet the changing needs of the space while maintaining the desired temperature. This leads to increased efficiencies, low energy consumption and a very comfortable environment. Our Infrared Remote Control with an easy to read LCD Display, gives the user the capability to adjust and set for complete automatic operation: Temperature, Timer, Sweep (Louver Control). Fan Speeds, Night Backup and more. The SAA Concealed Duct System are ideal for residential and light commercial applications that have a lack of attic space and work extremely well in large, open spaces.
		Floor Standing System 18,000 - 48,000 BTU The SAA Floor Standing Units are ideal for light commercial applications and work extremely well in large, open spaces. If ceiling attic space is an issue, the SAA Floor Standing Units fit into any small niche in the wall for an ultra-quiet operation.
		SAA Central Heat Pump System 18,000 - 60,000 BTU The SAA Central Heat Pump Systems are central air conditioners that can also heat the whole building. Many homes and offices with adequate attic or floor space for the necessary duct work can use the SAA Central Heat Pump System. With our programmable thermostat, you can monitor when the SAA Central Heat Pump System comes on or goes off, maximizing your energy efficiency. Most conventional Air Conditioners have an additional heat strip inside. However, with our reversed cycle system, the SAA Central Heat Pump System is more efficient and saves you money in the long run. The SAA Central Heat Pump System is ideal for existing and new residential or light commercial applications.
		SAA Package Units 24,000 - 72,000 BTU The SAA Package Unit (Roof Top Unit) is a central air conditioner that is a single package system. Many commercial building applications require single package units. The SAA Package Unit is ideal for these applications, providing the savings that is a standard feature of all the SAA product lines. The SAA Package Units have a side or bottom access to meet your commercial needs. The SAA Package Units are available in larger units, like a 120,000 Btu for special orders.

Call us at 786-346-7590 or email us at sales@southerncomfortac.com for more pricing or ordering information.

---

RD Fresh, 100% Natural Refrigeration Dehumidifiers

• Absorbs up to 55% of its weight in humidity.
• Increases the shelf life of food up to 50%.
• Reduces the transfer of food odors.
• Reduces the spread of bacteria and cross contamination.
• Reduces refrigeration temperatures 3-5 degrees. Reduces refrigeration cycles up to 50% extending the life of the compressor.

IT’S SIMPLE: KEEP FOOD FRESHER, LONGER!!!

• Moisture accelerates the spoilage of meat. Meat emits ammonia and nitrogen, which in turn further accelerates the spoilage. RD FRESH absorbs water (H₂O), ammonia (NH₃) and nitrogen (N).
• Fish emits carbon dioxide, hydrogen sulfide and ammonia. RD FRESH absorbs carbon dioxide (CO₂), hydrogen sulfide, (H₂S) and ammonia (NH₃)
• Produce emits ethylene gas, which accelerates the ripening and spoilage of other produce. RD FRESH absorbs this ethylene gas.

ZEOLITE: THE ULTIMATE “GREEN” MINERAL

• RD FRESH uses a proprietary mix of zeolites (clinoptilolite and chabazite) along with montmorillonite and activated bamboo charcoal.
• The minerals have a unique 3-dimensional structure (similar to a honeycomb) consisting of interconnected tunnels and cages.
• Moisture molecules move freely into the tunnels, and are then trapped along with unwanted gases within the cages.
• RD FRESH minerals are all 100% recyclable to the earth.

Free 30 Day Trail no obligation to buy.

Call us at 786-346-7590 or email us at sales@southerncomfortac.com for more pricing or ordering information.

---

ecoSMART GREEN ENERGY PRODUCTS

       

ELECTRIC TANKLESS WATER HEATERS

Ecosmart vs Tank Heater

We manufacture a full line of tankless water heaters ranging from 3.5kw to 27 kw, 208 volts to 277 volts. Our products can be used for "Point of Use" heating, whole house residential, commercial, industrial, boating, medical and more. We manufacture the ONLY self modulating (Patent Pending) whole house electric tankless water heater with the finest quality components and American Design.
Our exclusive self modulating technology is designed to read inlet water temperature, flow rate and temperature settings. These readings are processed, calculated and adjusted at a rate of 60 times per second, providing and adjusting the necessary power and energy consumption.
Unlike most other tankless water heaters that turn On and Off and regulate based on over heating at the outlet, our units only consume the energy required for specific flow rates thereby offering greater savings and a constant water temperature. No fluctuating, dimming or flickering of the lights and most importantly, no power surges.
All our units are competitively priced to conventional storage tank heaters making ECOSMART the easy and intelligent choice, allowing the consumer to Go Tankless and Go Green.

Why Ecosmart tankless water heaters are the very best choice on the market today:

1. True Flow Modulation & Thermostatic Control: Set it and forget it! Ecosmart tankless water heater features the most advanced temperature control system available in an electric tankless water heater today. It constantly measures the water flow rate and incoming water temperature to modulate power to the heating elements to maintain a precise output temperature as selected by the user. A convenient digital display indicates the temperature setting.
2. Quality Components: The heating chambers are copper and brass on the ECO16- ECO27, stainless steel on ECO6-ECO11. POOL HEATER heating chambers and heating element are stainless steel. All top quality UL/CSA components.
3. Industry Leading Lifetime Warranty: Offers a lifetime parts warranty on all parts including the heating elements! If your heater ever needs to be repaired, a temporary replacement unit is sent to you while your unit is being fixed so you do not have to endure days or even weeks without hot water.
4. Technical Support: One of the partners has been in the industry for more than 16 years and has personally been responsible for many of the innovations seen in the industry. The bottom line is that our staff knows this business – there is not an application or situation we have not seen before.
5. Price and Value: At the end of the day, price still matters too. As a homeowner or business, you deserve the best value for your dollar. Not only does the ECOSMART tankless heater deliver the most advanced technology, top notch quality, industry-leading warranty, and expert technical support, it is offered at prices comparable to traditional storage tank heaters

Why Tankless? Why Ecosmart?

The models or units we manufacture are of the highest energy efficiency in comparison to any other type of hot water heating appliance. They meet and exceed all of the criteria’s of other water heaters, be it tankless or traditional storage type, gas or electric as it pertains to Energy Efficiency, Water Saving, Life Cycle, Sustainability Environmental De gradation and Energy Savings. Just a couple of the environmental benefits from converting to an ECOSMART tankless water heater are twofold: reduction in greenhouse gas emissions from using less energy and reduction in landfill waste from the longer service life and smaller size.

Tank Heater energy consumption= 3,150 watts (3.15 KWH x .12 cents) = .378 cents

ECOSMART energy consumption = 1,617 watts (1.61 KWH x .12 cents) = .193 cents

That’s a 51% savings on a straight usage comparison.

		ECO 11 - This 11.8KW@220V 13.9KW@240V Smart Technology electric tankless water heater is configured for climates where incoming water temperatures are in the 60-70F range. The model ECO 11 is well suited for homes in the southern States , Lower Texas, Florida.ECO 8- This 7.3KW@240V Smart Technology electric tankless water heater is configured for climates where incoming water temperatures are in the 78F+ range. The model ECO 8 is well suited for small homes and apartments were a maximum of 30 amps can be used and single hot water applications are the norm and water saver shower heads and aerators are used.ECO6 - This 6.0KW@220V Smart Technology electric tankless water heater is configured for climates where incoming water temperatures are in the 78+F range. The model ECO6 is well suited for small homes and apartments were a maximum of 30 amps can be used and single hot water applications are the norm and water saver showerheads and aerators are used.
		ECO 18 - This 18KW@240V Smart Technology electric tankless water heater is configured for climates where incoming water temperatures are in the 60-70F range. The ECO 18 is well suited for homes in the southern States , Lower Texas, Florida.ECO 16 - This 16KW Smart Technology electric tankless water heater is configured for climates where incoming water temperatures are in the 70F+ range. The ECO 16 is well suited for homes in the southern States , Lower Texas, Florida. Not for multiple simultaneous use.
		ECO 27 - The Most Powerful 27KW@240V Smart Technology electric tankless water heater on the market. The ECO 27 – 27KW water heater is configured for COLD CLIMATES where the incoming water temperature can drop below 45F well suited for homes in the Northern U.S. and Canada and in the southern U.S. that have large Roman-style or Jacuzzi tubs and that have generally more demanding water usage needs.ECO 24 – This 24KW@240V Smart Technology electric tankless water heater is configured for climates where the incoming water temperature can drop below 55F. The ECO 24 is well suited for homes in the Northern U.S. and Canada and in the southern U.S. that have large Roman-style or Jacuzzi tubs and that have generally more demanding water usage needs.ECO 21 – This 21KW@240V Smart Technology electric tankless water heater is configured for climates where incoming water temperatures can drop below 60F. The ECO 21 is well suited for homes in the Northern U.S. and Canada and in the southern U.S. that have large Roman-style or Jacuzzi tubs and that have generally
		ECO "POINT OF USE" This 3.5@110V or 5.5kw@220V electric tankless water heater is designed for single applications with maximum flow of 1 gpm, this electric tankless water heater is perfect for wet bars, strip malls, Dr. offices , boats, RV and more.

---

Gas TANKLESS WATER HEATERS

ECO GAS TANKLESS WATER HEATER 28L – COMING SOON

		Pool & Spa Heaters  - Spa from 5.5KW-11KW @ 240V POOL 18KW-27KW @240V
		Radiant Floor Heat  - The only electric tankless water heater designed for hydronic or radiant heating. Available in 6 KW, 11 KW, 18 KW, 21 KW, 24 KW and 27 KW. Stainless Steel Heat Exchanger, Self Modulating Technology.
		Water Conservation Kit- Includes 1 Massage Shower head, 1 kitchen swivel aerator, 2 bathroom sink aerators. This water saver kit can save you up to $300.00 a year.
		Remote Control Accessory - This optional Remote Control can easily be installed via a 4 pin telephone cable. It allows you to set your desired temperature right at your shower, thereby offering you greater energy and water savings.

Call us at 786-346-7590 or email us at sales@southerncomfortac.com for more pricing or ordering information.

---

eCube

   

What's eCube®?

Simply put, eCube® is an Energy-Saving Device for Commercial Refrigerators.

The eCube® Concept

• Commercial refrigerators waste 15-30% of their energy and run 50% or more cycles than necessary trying to keep food temperature constant
• Thermostats measure air temperature - not food temperature
• eCube®’s technology simulates food and beverage thermal qualities and automatically relays this information to the existing thermostat or telemetry
• Cooling cycles are reduced - saving energy, lowering wear and tear, reducing emissions and ensuring better food safety

How eCube® works

eCube® consists of a food simulant contained in a double-skinned enclosure that mimics food temperature at approximately 10mm beneath the surface. With eCube®, the thermostat regulates the refrigeration temperature based upon food temperature rather than air temperature, thereby maintaining food at the proper temperature. When fitted to the thermostat sensor, which controls the compressor, eCube® significantly reduces the frequency of the refrigeration cycles which are now based on food temperature rather than fluctuating air temperature. By using eCube® as a cycle control mechanism, refrigeration cycles last longer but can be reduced by as much as 85%. For example, a Dairy Case cycles 3 minutes on, 2 minutes off = 12 cycles per hour. With eCube®, the cycles change to 8 minutes on, 7 minutes off = 4 cycles per hour; a 66.7% reduction in starts. As the start-up of a refrigerator compressor uses 3 times more power (i.e. start-up 12 amps, run 4 amps) considerable energy savings are achieved. In addition, the more efficient refrigeration cycle leads to a more efficient unit, which then leads to a colder storage area. Consequently, by re-adjusting the thermostat back to its normal temperature settings, there are further substantial energy savings, without compromising food safety and quality.

Energy Savings Reduce Energy Consumption 10-30% (average) Reduced Compressor Cycles Reduce Compressor Cycles up to 85% Double Component Lifespan NSF Approved Accurate temperature mimicking Safe for use around Food Environment Reduce CO2 Emissions, Green Image Return on Investment 50% (< 2 Years) Easy to Install and Use Installs in as little as 5 minutes Works with electronic & mechanical thermostats No electrical or mechanical parts Small & compact 5 year warranty Money-Back Guarantee

EC 103 (2-3” probes) EC 101 (1" probes)

Call us at 786-346-7590 or email us at sales@southerncomfortac.com for more pricing or ordering information.

---

KVAR

    

Guaranteed Savings on Your Electric Bill

Save between 6% to 25% by reducing wasted energy at the meter and demand on the electric grid.

The KVAR Energy Controller (KVAR EC™)

A ‘Now Solution’ for energy efficiency and smart grid.

		The KVAR EC™ is a cost effective product that reduces electric consumption and spans through the residential, commercial and industrial markets, specifically all electrical service from 600 volts and below. The tangible results of using the KVAR ECs™ are real savings on energy bills, reduction in demand for electric utilities, decreased line losses and carbon emissions. The KVAR Corp. holds a U.S. Patent for the method and apparatus to determine the specific amount of capacitance to bring power factor to unity, thus optimizing all inductive loads. To prove its reliability and savings, KVAR ECs™ have successfully been tested and received endorsements from NASA, Honeywell and SMT Engineering LLC., an independent third party. The KVAR EC™ is UL and CSA listed, CE certified and meets RoHS (Restriction on Hazardous Substances Directives). The RoHS compliance qualifies KVAR ECs™ as Green Products since all its electric and electronic components are compliant. This means the passive units of fixed capacitors is made of linseed oil capacitors, as opposed to PCBs, the wiring and other components are also of premium grade. KVAR EC™ was designed for a 25 year life cycle.
		Our KVAR Distributors guarantee 6% savings on residential products and the KVAR Corp. provides a 12 year warranty. Commercial and industrial KVAR ECs™ have a 5 year warranty and no product is deployed and commissioned unless they show a Return on Investment (ROI) of 3 years or less. With a large segment of clients that boast an ROI in terms of months only. The KVAR Corp. patented scientific method and apparatus used to size the exact amount of capacitance required to bring power factor to unity, provides great accuracies and time to size efficiencies. The three KVAR sizing units available simplify the process of determining the amount of capacitance that is needed to optimize motor loads. There is no requirement for equipment charts, specifications and expansive modeling. The entire sizing process is conducted on-site by tuning the electrical system from the inductive equipment back through the electric utility meter. The PF optimization of the electric system reduces energy consumption for the utility customer, reduces demand on the electric grid, and reduces line losses and carbon footprint. Once the electricians have completed the sizing procedure, they simply forward the requirements to our manufacturing plant in Daytona Beach and custom equipment is built to suit the on-site sizing that was conducted.
		The KVAR Corp. also produces Commercial-Off-The-Shelf (COTS) KVAR ECs™. Our energy controllers reclaim, store and supply power to inductive motors and loads. Considering all induction loads consume two kinds of power: Reactive power and working power of kilowatt. The working power performs the work of the motor. The only function of reactive power is to develop the electromagnetic fields (EMFs) to ground the induction windings of the motor. The KVAR EC™ stores the reactive power needed to create EMFs within the inductive loads. As the motor operates, this reactive power is pulled and pushed to and from the KVAR EC™ by the motor. Reactive motor is now reclaimed and recycled by the KVAR EC™ resulting in such power being supplied on the spot. Since reactive power is supplied locally, motors run cooler and more efficiently. This results in dollar savings on your energy bill in terms of energy and electric demand being saved, and longer equipment life. Commonly, on inductive loads, electricity does not travel efficiently because there are several inherent losses within the electric grid. The National Electric Code (NEC) requires that every wire, every circuit breaker, distribution panel and transformer must be at least 125% oversized. This results in most motors being lightly loaded; therefore increasing the amount of electrical losses at the loads and throughout the electrical system. By using KVAR ECs™, energy losses are reduced on the load side of the utility transformer through the optimization of the PF of individual inductive loads. The measured overall effect on individual applications varies. Because we test the PF before and after, we are able to determine the requirement or non-requirement for a KVAR EC™, with potential customers having full knowledge of the efficiency of their electric system. Our KVAR Distributors are bound to install KVAR ECs™ only when an estimated 6% of savings will accrue to the customer. Typical savings for residential units will vary from 6% to 10%; commercial from 6% to 17%; and industrial from 6% to 25%. We also have a long list of deployments that exceed these benchmarks. Our satisfied customers span the globe and are found in most business sectors. Customer testimonials, including billing evidence, datasets and sector-by-sector references are available upon request. Area-wide deployments of KVAR EC™ will significantly reduce demand placed on the electric grid. Utilities will also reduce both transformer and line losses. All KVAR EC™ equipped customers will also benefit from reduced power bills. For customers subjected to demand charges and PF penalties, they will be reduced or eliminated. Working in conjunction with electric utilities, the KVAR Corp. helps prepare and coordinate energy efficiency programs suited to the individual requirements of the utility and their customer base. In North America, the KVAR Corp. is already working with its KVAR Distributors and their customers to help them take advantage of incentive programs available through utilities, power planning council, administrations and commissions; and other municipal, county, state, federal and provincial entities. The KVAR EC™ truly represents a potent electric distribution system improvement, which needs to be considered first among energy efficiency and conservation measures that have the ability to better both the electric grid and utility customers. The key to obtaining the best possible economic advantage from electric power is to get rid of wasted power by ensuring a high PF throughout the Smart Grid.

Call us at 786-346-7590 or email us at sales@southerncomfortac.com for more pricing or ordering information.